Specifications

OBJECT MAP

*1 Signal names are initial values. Using Pr. 180 to Pr .184, you can change input signal functions. Note that some of

signals do not accept a command from the network according to the Pr. 338 and Pr. 339 settings. For example,

reset (terminal RES function) of Bit12 can not be controlled via the network. (refer to page 30)

Refer to the Instruction Manual of the inverter for details of Pr. 180 to Pr.184.

*2 Signals of the Bit1 and Bit2 can not be changed. Even if signals are changed using Pr. 178 and Pr. 179, the settings

are invalid.

Refer to the Instruction Manual of the inverter for details of Pr. 178 and Pr.179.

When using polling I/O message together, do not use start command (forward rotation, reverse rotation) of polling.

(Turn off Bit5 (NetCtrl) of Byte0.)

Use start command of Class 0x2A, instance 1, attribute 114 stated in the table for start command (forward

rotation/reverse rotation).

*3 Signals of the Bit7 and Bit8 can not be changed.