Specifications

86
OBJECT MAP
7.10 Class 0x70 to 0x79 (Extended Object III)
7.10.1 Class 0x70 to 0x79 Instance 1, 2
Set parameters of the inverter. Refer to the Instruction Manual of the inverter for details of the parameters.
(1) Attribute
(2) Service
Class Instance Attribute Parameters Access Description
0x70 1 10 to 109 Pr. 0 to Pr. 99 Get/Set
0x71 1 10 to 109 Pr. 100 to Pr. 199 Get/Set
0x72 1 10 to 109 Pr. 200 to Pr. 299 Get/Set
0x73 1 10 to 109 Pr. 300 to Pr. 399 Get/Set
0x74 1 10 to 109 Pr. 400 to Pr. 499 Get/Set
0x75 1 10 to 109 Pr. 500 to Pr. 599 Get/Set
0x76 1 10 to 109 Pr. 600 to Pr. 699 Get/Set
0x77 1 10 to 109 Pr. 700 to Pr. 799 Get/Set
0x78 1 10 to 109 Pr. 800 to Pr. 899 Get/Set
0x79
1 10 to 109 Pr. 900 to Pr. 999 Get/Set Parameter offset for calibration, gain
2 10 to 49 Pr. 900 to Pr. 939 Get/Set Analog value of calibration parameter
Service Code Description
0x0E Get Attribute Single
0x10 Set Attribute Single