Instruction manual

NETWORK VARIABLES

6.8.15 PID manipulated variable gain (0.1Hz increments)

(network input config SNVT_freq_hz nciInvPIDOpeGain)

You can set the manipulated variable of the inverter in 0.1Hz increments when the deviation (difference

between set point and process variable) under PID control is 100%.

⋅ Data acceptance timing..... At network variable receive (nv_update_occurs event)

Data Name Initial Value Range Increments

Setting Value

Storage Location

nciInvPIDOpeGain Initial value of Pr. 125 (Pr. 903) 0.0Hz to 400.0Hz 0.1Hz/bit Pr.125(Pr.903)

REMARKS

• Refer to the inverter manual for use of PID control and details of Pr. 125 (Pr.903).