Instruction manual

14
WIRING
3.2 Wiring
(1) Strip off the sheath of the cable for LONWORKS communication. If the length of the sheath peeled is
too long, a short circuit may occur among neighboring wires. If the length is too short, wires might come
off.
REMARKS
• Information on bar terminals
Commercially available product examples (as of September, 2006)
Cable stripping size
7mm
Wire the stripped cable after twisting it to prevent it from becoming loose.
(Do not solder it.)
Use a bar type terminal as required.
Bar terminal crimping tool: CRIMPFOX ZA3 (Phoenix Contact Co., Ltd.)
Terminal
Screw Size
Wire Size
(mm
2
)
Bar Terminal Model
Maker
With insulation sleeve Without insulation sleeve
M3
0.3 to 0.5 Al 0,5-6WH A 0,5-6 Phoenix Contact
Co.,Ltd.
0.5 to 0.75 Al 0,75-6GY A 0,75-6
When using the bar terminal (without insulation sleeve),
use care so that the twisted wires do not come out.