Instruction manual

15
WIRING
3
(2) Loosen the terminal screw and insert the cable into the terminal.
Tighten the fastening screws to the recommended tightening torques. Leave the other end of the cable
unconnected.
Screw Size Tightening Torque Cable Size Screwdriver
M3 0.5N⋅m to 0.6N⋅m
0.3mm
2
to 0.75mm
2
Small flat-blade screwdriver
(Tip thickness: 0.4mm /tip width: 2.5mm)
CAUTION
• Undertightening can cause cable disconnection or malfunction. Overtightening can cause a short circuit or
malfunction due to damage to the screw or unit.
REMARKS
• Change the number of twisted pair cables to insert in NET_A and NET_B according to the system used.
Twisted pair cable
To be connected
to other node
Twisted pair cable
To be connected to
other node
<When using one twisted pair cable>
<When using two twisted pair cables>
NET_A
NET_B
NET_A
NET_B