Instruction manual

23
INVERTER SETTING
4
(3) Operation mode switching method
For the switching method from the external terminal, refer to the inverter manual.
Refer to page 46 and 78 for a switching method from the network.
CAUTION
• When starting the inverter in network operation mode at powering on or an inverter reset, set a value other
than 0 in Pr. 340. (Refer to page 21)
• When setting a value other than 0 in Pr. 340, make sure that the initial settings of the inverter are correct.
Press of
the PU to light
Switching from the network
Switch to network operation
mode from the network.
Switch to the external
operation mode from
the network.
External operation
Switching from the PU
Network operation PU operation
Network operation PU operation
Press of
the PU to light
When "0 or 1" is set in Pr. 340
When "10" is set in Pr. 340
Press of the PU to light
Press of the PU to light