Instruction manual

37
5
FUNCTION OVERVIEW
5.2 Output from the Inverter to the Network
Main items to be output from the inverter (FR-A7NL) to the network and their descriptions are explained
below.
Item Description
Refer to
Page
Object status You can check the condition of the node. 47
Speed monitor You can monitor the output frequency in 0.005% increments. 50
Inverter output signal You can monitor the output terminal status of the inverter. 53
Output frequency monitor
You can monitor the output frequency in 0.1/0.01Hz or 0.005%
increments.
57, 58, 76
Output current monitor You can monitor the output current in 0.1A increments. 59
Output voltage monitor You can monitor the output voltage in 0.1V increments. 59
Actual operation time monitor You can monitor the actual operation time of the inverter. 59
Cumulative power monitor You can monitor the cumulative power of the inverter. 60
Alarm occurrence definition At inverter alarm occurrence, you can confirm the alarm definition. 62
Product information You can output the maker name and type as a character string. 64
Emergency stop status You can confirm the emergency stop status of the inverter. 66
Alarm status You can check whether the inverter is in the alarm status or not. 67
Monitor data You can check the monitor value corresponding to the monitor code set. 75
Command response
You can check the reply to command requests, e.g. operation mode
selection, parameter write, inverter reset, from the inverter.
82
REMARKS
• Refer to the inverter manual for functions controllable from the network in each operation mode.