Instruction manual

39
5
FUNCTION OVERVIEW
Heartbeat send time interval
You can set the heartbeat send time interval of output network
variables.
87
Minimum heartbeat send time
You can set the minimum heartbeat send time of output
network variables.
87
Acceleration time You can set the motor acceleration time. 90
Deceleration time You can set the motor deceleration time. 91
PID action selection You can choose the operation of PID control. 92
PID proportional band You can set the proportional band for PID control. 94
PID integral time You can set the integral time for PID control. 94
PID differential time You can set the differential time for PID control. 95
PID manipulated bias You can set the manipulated variable at 0%. 95
PID manipulated gain You can set the manipulated variable at 100%. 96
Heartbeat receive time interval
You can set the heartbeat receive time interval of input network
variables.
97
Maximum speed You can set the maximum speed of the inverter. 99
Minimum speed You can set the minimum speed of the inverter. 99
Reference speed setting
You can set the reference speed of maximum speed, minimum
speed, speed adjustment, speed monitor.
100
Reference frequency setting
You can set the reference frequency of maximum speed,
minimum speed, speed adjustment, speed monitor.
101
Default value of speed adjustment You can set the default value of speed adjustment. 101
Event driven detection width
You can set the event driven detection width of the monitor-
related output network variables.
102
REMARKS
• Refer to the inverter manual for functions controllable from the network in each operation mode.
Item Description
Refer to
Page