Instruction manual

45
6
NETWORK VARIABLES
6.3 LONWORKS Object
6.3.1 Setting range of object ID
The setting values of object ID are 0 to 4 and are as listed below.
When any values 5 to 65535 are set for object ID, invalid_id bit of object status (nvoStatus) becomes 1 and
a command set for object request is made invalid. (Refer to page 47)
Object ID Description
0 Node object
1 Variable Speed Motor Drive object [LONMARK object]
2 Inverter basic function
3 Inverter PID control function
4 Inverter extended function