Instruction manual

54
NETWORK VARIABLES
<Output Signal List>
The following signals can be assigned to Bit2, Bit6 and Bit7 using Pr.190 to Pr.192 respectively.
For details of signal definitions, refer to Pr. 190 to Pr. 192 Output terminal function selection of the inverter
manual.
REMARKS
• When an option error ( ) occurs, all outputs are tuned off.
Setting
Signal
Name
Function
Positive
Logic
Negative
Logic
0 100 RUN Inverter running
1 101 SU Up to frequency
3 103 OL Overload alarm
4 104 FU Output frequency detection
7 107 RBP Regenerative brake pre-alarm
8 108 THP
Electronic thermal O/L relay function
pre-alarm
11 111 RY Inverter operation ready
12 112 Y12 Output current detection
13 113 Y13 Zero current detection
14 114 FDN PID lower limit
15 115 FUP PID upper limit
16 116 RL PID forward/reverse rotation output
20 120 BOF Brake opening request
25 125 FAN Fan fault output
26 126 FIN Heatsink overheat pre-alarm
46 146 Y46
During deceleration at occurrence of
power failure
47 147 PID During PID control activated
64 164 Y64 During retry
90 190 Y90 Life alarm
91 191 Y91 Fault output 3 (power-off signal)
93 193 Y93 Current average value monitor signal
95 195 Y95 Maintenance timer signal
96 196 REM Remote output
98 198 LF Alarm output
99 199 ALM Fault output
9999  No function
Setting
Signal
Name
Function
Positive
Logic
Negative
Logic