Instruction manual

57
6
NETWORK VARIABLES
6.5.6 Output frequency monitor (0.1Hz increments) (network output
SNVT_freq_hz nvoInvOutFreq)
You can monitor the output frequency of the inverter in 0.1Hz increments.
⋅ Data send event ......................When data changes in 0.1Hz increments
⋅ Data send timing ..................... As set in Pr. 388 Send time interval at heart beat and Pr. 389 Minimum sending
time at heart beat. (Refer to page 87)
Data Name Initial Value Range Increments
nvoInvOutFreq 0.0Hz 0.0Hz to 400.0Hz 0.1Hz/bit
REMARKS
• This variable is similar to "output frequency monitor (0.005% increments)" (Refer to page 58) but may sometimes
differ from it in data send timing since they are different in mutual resolution.
• It is always displayed as frequency (Hz) regardless of the Pr.37 setting.