Instruction manual

60
NETWORK VARIABLES
6.5.11 Cumulative power monitor (1kWh increments) (network output
SNVT_elec_kwh nvoDrvRunPower)
You can monitor the cumulative power of the inverter in 1kWh increments.
You can select monitoring data from either BCD code data or binary data according to Pr. 170 Watt-hour
meter clear. The initial value is binary data. (For details of Pr. 170, refer to the inverter manual.)
⋅ Data send event ......................When data changes in 1kWh increments.
⋅ Data send timing ..................... As set in Pr. 388 Send time interval at heart beat and Pr. 389 Minimum sending
time at heart beat. (Refer to page 87)
Data Name Initial Value Range Increments
Pr. 170
nvoDrvRunPower 0kWh
10 0 to 9999kWh (BCD code data)
1kWh/bit
9999
(initial value)
0 to 65535kWh (binary data)
REMARKS
• When the numerical value exceeds the maximum value in the monitoring range, the value returns to 0 and is
recounted from 0.