Instruction manual

IV
6.8.2 Forward/reverse rotation prevention (network input config SNVT_count nciInvFwdRevLock).....................84
6.8.3 % set reference frequency (network input config SNVT_freq_hz nciInvSetFreqBas) ..................................85
6.8.4 Maximum frequency (0.1Hz increments) (network input config SNVT_freq_hz nciInvMaxFreq) .................86
6.8.5 Minimum frequency (0.1Hz increments) (network input config SNVT_freq_hz nciInvMinFreq) ...................86
6.8.6 Heartbeat send time interval (network input config SNVT_time_sec nciSndHrtBt) ......................................87
6.8.7 Minimum heartbeat send time (network input config SNVT_time_sec nciMinOutTm) .................................87
6.8.8 Acceleration time (network input config SNVT_time_sec nciRampUpTm)...................................................90
6.8.9 Deceleration time (network input config SNVT_time_sec nciRampDownTm)..............................................91
6.8.10 PID action selection (network input config SNVT_count nciInvPIDSwitch) ..................................................92
6.8.11 PID proportional band (network input config SNVT_count nciInvPIDPro)....................................................94
6.8.12 PID integral time (network input config SNVT_time_sec nciInvPIDIntTm) ...................................................94
6.8.13 PID differential time (network input config SNVT_time_sec nciInvPIDDiffTm).............................................95
6.8.14 PID manipulated variable bias (0.1Hz increments)
(network input config SNVT_freq_hz nciInvPIDOpeBias) ............................................................................95
6.8.15 PID manipulated variable gain (0.1Hz increments)
(network input config SNVT_freq_hz nciInvPIDOpeGain)............................................................................96
6.8.16 Heartbeat receive time interval (network input config SNVT_time_sec nciRcvHrtBt) ..................................97
6.8.17 Maximum speed (0.005% increments) (network input config SNVT_lev_percent nciMaxSpeed)................99
6.8.18 Minimum speed (0.005% increments) (network input config SNVT_lev_percent nciMinSpeed)..................99
6.8.19 Reference speed setting (network input config SNVT_rpm nciNmlSpeed)................................................100
6.8.20 Reference frequency setting (network input config SNVT_freq_hz nciNmlFreq) .......................................101
6.8.21 Speed adjustment default value (network input config SNVT_lev_percent nciDrvSpeedScale) ................101
6.8.22 Event driven detection width (network input config SNVT_lev_percent nciInvEvtDuty)............................. 102
7 TROUBLESHOOTING 104
APPENDIX 105
Setup Example ...............................................................................................................................105
Example of Inverter Parameter Clear ...........................................................................................106