Instruction manual

79
6
NETWORK VARIABLES
Set frequency
(RAM)
Write H00ED
Write set frequency to RAM or EEPROM.
⋅ H0000 to H9C40 (0 to 400.00Hz):
Frequency .... Increments 0.01Hz
(Always set frequency (Hz) regardless of the Pr.37 setting.)
⋅ To change the set frequency consecutively, write data to the inverter
RAM. (Code number: H00ED)
Set frequency write
(RAM and
EEPROM)
Write H00EE
Parameter
Read
H0000 to
H0063
⋅ Refer to the instruction code in the parameter list in the inverter manual to
read and write as required.
Write to Pr. 77 and Pr. 79 is disabled.
When setting Pr.100 and later, link parameter expansion setting must be
set.
⋅ Set 65520 (HFFF0) as a parameter value "8888" and 65535 (HFFFF) as
"9999".
⋅ When changing the parameter values frequently, set "1" in Pr. 342 to write
them to the RAM. (Refer to page 28)
Write
H0080 to
H00E3
Alarm definition all
clear
Write H00F4 H9696: Batch-clears the alarm description
Item
Read/
Write
Instruction
Code
Data Description