Instruction manual

NETWORK VARIABLES

6.8.3 % set reference frequency (network input config SNVT_freq_hz

nciInvSetFreqBas)

You can set the reference frequency of "set frequency (nviInvSetFreqP)" (Refer to page 56) and "output

frequency monitor (nvoInvOutFreqP)" (Refer to page 58).

The % set reference frequency can not be set at less than the minimum frequency resolution of the

inverter.

* 60Hz for the Japanese and NA version and 50Hz for the EC and CH version.

⋅ Data acceptance timing........... At network variable receive (nv_update_occurs event)

Data Name Initial Value Range Increments

nciInvSetFreqBas

60Hz / 50Hz *

1.0Hz to 400.0Hz 0.1Hz/bit

Parameter Name

1.00Hz to 400.00Hz 0.01Hz

390 % setting reference frequency

0.00Hz

(0%)

100.00%

Set frequency (nvilnvSetFreqP)

Output frequency monitor (nvilnvOutFreqP)

Frequency written to inverter

Output frequency of inverter

% setting reference frequency (nciInvSetFreqBas)