Instruction manual

17
PARAMETER LIST
C1
(901)
∗5
AM terminal calibration - -
C2
(902)
∗5
Terminal 2 frequency setting
bias frequency
0 to 400Hz 0Hz
C3
(902)
∗5
Terminal 2 frequency setting
bias
0 to 300% 0%
125
(903)
∗5
Terminal 2 frequency setting
gain frequency
0 to 400Hz 60Hz
C4
(903)
∗5
Terminal 2 frequency setting
gain
0 to 300% 100%
C5
(904)
∗5
Terminal 4 frequency setting
bias frequency
0 to 400Hz 0Hz
C6
(904)
∗5
Terminal 4 frequency setting
bias
0 to 300% 20%
126
(905)
∗5
Terminal 4 frequency setting
gain frequency
0 to 400Hz 60Hz
C7
(905)
∗5
Terminal 4 frequency setting
gain
0 to 300% 100%
C22
(922) ∗5
Parameter for manufacturer setting. Do not set.
C23
(922) ∗5
C24
(923) ∗5
C25
(923)
∗5
990 PU buzzer control 0, 1 1
991 PU contrast adjustment 0 to 63 58
Pr.CL Parameter clear 0, 1 0
ALLC All parameter clear 0, 1 0
Er.CL Faults history clear 0, 1 0
Pr.CH Initial value change list — —
∗1 Differ according to capacities.
6%: FR-E720-050 or less, FR-E740-026 or less
4%: FR-E720-080 to175, FR-E740-040 to 095
3%: FR-E720-240 and 330, FR-E740-120 and 170
2%: FR-E720-470 and 600, FR-E740-230 and 300
∗2 Differ according to capacities.
5s: FR-E720-175 or less, FR-E740-095 or less
10s: FR-E720-240 and 330, FR-E740-120 and 170
15s: FR-E720-470 and 600, FR-E740-230 and 300
∗3 Differ according to capacities.
6%: FR-E720-008 and 015
4%: FR-E720-030 to 330, FR-E740-016 to 170
2%: FR-E720-470 and 600, FR-E740-230 and 300
∗4 The range differs according to the Pr. 71 setting.
∗5 The parameter number in parentheses is the one for use with the
operation panel (FR-PA02
-02) for the FR-E500 series or parameter unit
(FR-PU04/FR-PU07).
∗6 The initial value differs according to the voltage class. (200V class, 400V
class)
Parameter Name
Setting
Range
Initial
Value
E700_NA_Guideline_ib0600333ENG.book 17 ページ ２００７年１１月２８日 水曜日 午前１０時２０分