Instruction manual

1
1 PRODUCT CHECKING AND PARTS IDENTIFICATION
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
z Installation of the inverter
Enclosure surface mounting
Note
y When encasing multiple inverters, install them in parallel as a
cooling measure.
y When using the inverters at the ambient temperature of 40
° C
(104°F)
or less, the inverters can be installed without any
clearance between them (0cm (0 inch) clearance). When ambient
temperature exceeds 40
° C (104°F) , clearances between the
inverters should be 1cm (0.39inch) or more (5cm (1.96inch) or
more for the FR-E720-240 and FR-E740-120, or more).
y Install the inverter vertically.
FR E740 095
Displays the
rated current
---
NA
Symbol Voltage class
E720
Three-phase 200V
class
E740
Three-phase 400V
class
Inverter type
Serial number
Capacity plate
FR-E740-095-NA
Rating plate
Inverter type
Input rating
Output rating
Serial number
FR-E740-095-NA
Inverter type Capacity plate
Rating plate
Remove the front cover and
wiring cover to fix the inverter
to the surface.
Front cover
Wiring cover
Front cover
Wiring cover
FR-E720-008 to 050
FR-E720-080 or more
FR-E740-016 or more
Vertical
10cm(3.94inches)
or more
10cm(3.94inches)
or more
Refer to the clearances
on the left.
E700_NA_Guideline_ib0600333ENG.book 1 ページ ２００７年１１月２８日 水曜日 午前１０時２０分