Instruction manual

ManualsBrandsMitsubishi Electric ManualsConsumer electronicsFR-V520-1.5K to 55K

111

112

113

114

115

116

117

118

119

120

116

REVISIONS

* The manual number is given on the bottom left of the back cover.

For Maximum Safety

Mitsubishi vector inverters are not designed or manufactured to be used in equipment or systems in situations

that can affect or endanger human life.

z When considering this product for operation in special applications such as machinery or systems used in

passenger transportation, medical, aerospace, atomic power, electric power, or submarine repeating

applications, please contact your nearest Mitsubishi sales representative.

z Although this product was manufactured under conditions of strict quality control, you are strongly advised to

install safety devices to prevent serious accidents when it is used in facilities where breakdowns of the product

are likely to cause a serious accident.

z Please do not use this product for loads other than three-phase induction motors.

Print Date * Manual Number Revision

Oct., 2001 IB(NA)-0600064-A First edition

Mar., 2002 IB(NA)-0600064-B

Three-phase 400V power input specifications

Sep., 2002 IB(NA)-0600064-C

• Addition of "28" to the setting range of Pr. 180 to Pr.183, Pr.187(input terminal function

selection)

• Addition of "39, 139" to the setting range of Pr. 190 to Pr.192, Pr.195(output terminal

function selection)

• Addition of "2" to the setting range of Pr. 288 "droop function operation selection"

• Addition of "9999" to the setting range of Pr. 427 "excessive level error"

• Instructions for Compliance with the European Directives

• Instructions for Compliance with U.S and Canadian Electrical Codes

Nov., 2003 IB(NA)-0600064-D • Error correction

•SF-V5RU

Nov., 2006 IB(NA)-0600064-E

• Pr.408 "motor thermistor selection"

• Pr.505 "speed setting reference"

• Addition of "9" to the setting range of Pr. 800 "control method selection".

• Addition of "5, 6" to the setting range of Pr. 804 "torque command source selection".

• Pr.811 "set resolution switchover"

• Settings of Pr.3 "base frequency" and Pr. 84 "rated motor frequency" were changed to

"10 to 200Hz"

• Short circuit ratings (Instructions for UL and cUL compliance)

Addition

Partial additions

Addition

Partial modifications