Instruction manual

20
Setting the motor
2.3 Setting the m otor
This inverter is factory-set to run the dedicated motor (SF-V5RU (1500r/min series) with encoder)
(It is not necessary to reset the inverter if you use the dedicated motor (SF-V5RU (1500r/min series) with encoder)
(only when inverter capacity = motor capacity).)
2.3.1 Dedicated motor (SF-V5RU (1500r/min series))
Check that the Pr.71 "applied motor" (extended mode) setting is "30" (SF-V5RU) (factory setting value).
2.3.2 Motor one rank lower than the dedicated motor (SF-V5RU (1500r/min series))
Set the parameter shown below.
0 SF-JR Inverter internal constants
10 SF-HRCA Inverter internal constants
POINT
The parameter below is extended mode parameter. Set "1" in Pr. 160 "extended function selection".
Parameter Name Factory Setting Setting Range
80 Motor capacity Inverter capacity 0.4kW to 55kW