Operating instructions

En-5
● OPERATING INSTRUCTIONS ●
C
E
CONO COOL OPERATION
Press during COOL mode page 4 to start
ECONO COOL operation.
The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 2°C higher auto-
matically.
Press again to cancel ECONO COOL operation.
Pressing also cancels ECONO COOL operation.
What is “ECONO COOL”?
Swing air fl ow (change of air fl ow) makes you feel cooler than constant air ow.
So, even though the set temperature is automatically set 2°C higher, it is pos-
sible to perform cooling operation with keeping comfort. As a result, energy can
be saved.
1
Press during operation to set the timer.
Each press changes timer mode in the following order:
2
Press to set the time of timer.
Each press increases or decreases the set time by 1 hour.
Press until “TIMER RELEASE” is selected to
release timer.
Note:
ON and OFF timers can not be used in combination.
If power failure occurs while ON/OFF timer is set, see page 4 “Auto restart
function”.
(OFF TIMER) (ON TIMER)
D
T
IMER OPERATION (ON/OFF TIMER)
TIMER
RELEASE
1. Lift the front panel until a “click” is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.
Wipe with a soft dry cloth or rinse it with water.
Do not soak it in water for more than two hours.
Dry it well in shade.
3. Install the front panel by following the removal
procedure in reverse. Close the front panel securely
and press the positions indicated by the arrows.
Instructions:
Switch off the power supply or turn off the breaker before cleaning.
Be careful not to touch the metal parts with your hands.
Do not use benzine, thinner, polishing powder, or insecticide.
Use only diluted mild detergents.
Do not expose parts to direct sunlight, heat, or fi re to dry.
Do not use water hotter than 50°C.
CLEANING
Air fi lter
Clean every 2 weeks
Remove dirt by a vacuum cleaner, or rinse with water.
After washing with water, dry it well in shade.
Important
Clean the lters regularly for best performance and to re-
duce power consumption.
Dirty fi lters cause condensation in the air conditioner which
will contribute to the growth of fungi such as mold. It is
therefore recommended to clean air fi lters every 2 weeks.
Front panel
Hole
Hinge
JG79A778H01_en.indd 5 2013/01/10 (木) 午後 2:50:50