Instruction manual

15
Operating
AUTO
When you want to set the humidity level.
The MODE button can also be used to select
AUTO.
Press
¡Frame appears around
AUTO
¡ AUTO
The unit maintains the humidity level by
automatically controlling airflow and
operating intermittently as necessary. All
you have to do is set the humidity level.
¡ The unit turns off when current humidity
decreases past the set humidity level, and
restarts when the level is exceeded. (airflow
and louvre stops)
¡ The unit operates for 6 minutes continuously
regardless of the humidity level immediately
after turning the power on.
Frequent use of exits and room
size/conditions may cause the humidity to
not reach the set level.
<To view set humidity level/ To set
humidity level>
¡ Pressing the button once
displays the set humidify level
with
the
indicator. After 3
seconds, the
display returns
to the current humidity display.
¡ Pressing the button while
is displayed sets
the humidity level. Each time
the button is pressed, the
humidity setting changes.
¡ AIR PURIFIER
The unit cleans the air by passing it
through the pre-filter and
photocatalytic filter. The
dehumidifying function is disabled.
∞ The air passes through the photocatalytic
filter in all modes, cleaning the air even if
the air purifier lamp is not lit.
∞ Cigarette smoke and toxins found in
smoke, such as carbon monoxide, cannot
be removed with these filters.
Information
AIR PURIFIER
To operate only the air purifier.
To return to the previous mode, press the air
purifier button again.
Press
¡Air purifier lamp lights
Information
Press
Press
again
6570 505560
e_mj_e22vx_a1(01_19)_e33.qx 11/15/04 5:09 PM Page 15