Instruction manual

The following is an example of a display
indicating AUTO dehumidifying (set to 60%),
swing set to WIDE and the ON timer set for 5
hours.
¡ The time remaining until the unit switches
itself on is indicated in increments of one
hour.
¡ When the set time is reached, the unit
switches itself on.
To cancel
Press the Power button. (Power off)
¡ The ON timer is cancelled.
∞ Internal cleaning is deactivated when the ON
timer is set during drying inside operations.
∞ The ON timer function is not operable using a
commercially-available timer plug outlet.
To set
1 Switch the power off.
2 Set the time you wish the unit to
turn on.
¡ Press once. The Power lamp, Mode
indicator, and a [ ] on the digital
display flash. The [ON] indicator lights.
¡ Each subsequent press changes the
display in order from 1 to 9 hours.
(Hold the button to run automatically
through the numbers.)
3 Select operating mode.
Select desired operating mode.
Set drying inside as desired.
4 Change the louvre swing
direction.
Select the desired setting.
5 Confirm the operating start time.
¡ Power lamp and Timer display light.
➝ The ON timer is set.
The unit informs you if you forget to press the
Power button by making the Timer display and
Mode indicator blink and sounding an alarm for 1
minute.
19
Operating
ON timer operation
The ON timer can be set for 1 to 9 hours.
Set the timer when the power is switched off.
Information
Press
Press
Press
No Display
(operation
is off)
12
17
13~15
16
e_mj_e22vx_a1(01_19)_e33.qx 11/15/04 5:09 PM Page 19