Instruction manual

21
Operating
2 Remove the tank lid, and empty.
3 Reattach the tank lid and replace
the water tank.
Confirm that the lid is securely attached to
the water tank, and push the tank in.
Close the front door.
¡ If the lid is not properly closed, you
may have problems removing the tank.
¡ If the tank is not installed correctly, the
tank full light will come on, and the unit
will not operate.
Tank lid
Pour the water
out as shown.
Removing Water from the Tank
The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 4L) is full.
Empty the tank.
1 Remove the water tank.
<Hold the tank this way>
Floating element
Do not remove or dismantle the float.
Note
12
Grasp handle and
slide out.
Open the front
door.
Do not remove or dismantle the floating element in
the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
e_mj_e22vx_a1(20_28)_e33.qx 11/15/04 5:17 PM Page 21