Instruction manual

After switching the unit off, leave for one day until
any water inside has had time to run off, then carry
out the following steps.
1 Perform internal cleaning
Performing internal cleaning to prevent mildew
growth is recommended.
2 Bundle
power cord.
3 Remove the
drainage
water.
Empty the water tank and
wipe away any remaining
drops of water.
4 Clean the
pre-filter.
Remove grit with
vacuum cleaner
5 Store the unit.
• When you are sure that all parts of the
unit are dry, cover it with a cloth to keep
it from dust.
• Store the unit in an upright position in a
place not exposed to direct sunlight.
Remove the front panel and pre-filter to
replace the photocatalytic filter.
For maintenance procedures see
25
Troubleshooting
Replacing the Air
Purifying Filter
The photocatalytic filter becomes depleted over
time.
Replace them when necessary.
Storage and
Disposal
Storage
21
10
Photocatalytic filter for replacement
∞ Type: MJPR-10TXFT
∞ Type code: 5C5 815
For these items contact your nearest Mitsubishi
Electric dealer.
Parts sold separately
Replacing the photocatalytic filter
Although the photocatalytic filter lasts roughly 2
years, replace it when:
¡ You have soaked the filter 8 times.
¡ The photocatalytic filter has turned brown due
to cigarette smoke or black with dust.
Filter life differs on usage and environmental
conditions.
17
23
When disposing the unit
Dispose according to the garbage regulations in
your district.
¡ Photocatalytic filter
Material: PET and PS
¡ Unit
Do not disassemble. Dispose according to the
garbage regulations in your district.
e_mj_e22vx_a1(20_28)_e33.qx 11/15/04 5:17 PM Page 25