Instruction manual

7
Before using the unit
Names and Functions of Parts
Front
Back
What is a washable photocatalytic filter?
The water tank may contain water residue at time of
purchase. This is from final product testing at the
factory and is not due to a defect.
The washable photocatalytic filter has a two-layer
construction consisting of a white particle filter and a
blue air-freshener filter.
<Particle filter>
The fine particle filter removes pollen* and dust
particles.
<Air-freshener Filter>
The special air-freshening agent contained in the
fibres of the air-freshener filter absorbs odorants
such as ammonia. The odor is broken down by
photocatalysis renewing the air-freshening
properties.
As the filter’s particle and air-freshening properties
are renewed by simply soaking and leaving it to dry
in the sun, the air purifier can be used continuously
over a long time.
Cigarette smoke and toxins found in smoke, such as
carbon monoxide, cannot be removed with this filter.
* Diameter of pollen: approx. 10-100µm
Front Air Intake
Do not block.
Control panel
Washable photocatalytic filter
(hereafter: photocatalytic filter) (see box below for discussion)
Supplied with unit.
Fit before use.
Pre-filter
Air filter performance testing facility
Japan Spinners Inspecting Foundation (tested under
JIS L 1902 standards).
Water tank
Front panel
Tank lid
Floating element
Front door
24~25
10
23
10
11
•
21
11
•
21
21
22
20
Louvre
Continuous drainage
outlet
Power plug
Wheel (4)
Sensor
Do not cover.
Side air intakes (left/right)
Do not block.
Handle
Raise handle to transport.
20
16
e_mj_e22vx_a1(01_19)_e33.qx 11/26/04 10:00 AM Page 7