Instruction manual
FA Products
Product Specifications.
Frame
Applicable standard
Expansion of UL listed product line-up
Commoditization of internal accessories
Commoditization for AC and DC circuit use
Compact size for easy to use
Measuring Display Unit (MDU) breakers
32-250A Frame
Applicable to IEC, GB, UL, CSA, JIS and etc.
New line-up of 480VAC type with high breaking performance for SCCR requirement
Reduction of internal accessory types from 3 to 1
Common use of 32/63A frame in both AC and DC circuit
Thermal adjustable and electronic circuit breakers are same size as 250AF fixed type
MDU breakers measure, display and transmit energy date to realize energy management.
Low Voltage Circuit Breakers
Mitsubishi WS-V Series Molded Case Circuit Breakers, Earth Leakage Circuit Breakers
◎The new electronic circuit breakers can display various measurement items.
◎Improvement of breaking performance with new breaking technology “Expanded ISTAC”.
◎Compliance with global standard for panel and machine export.
◎Commoditization of internal accessories for shorter delivery time and stock reduction.
Technologies based on long year experience realize more improved performance.
Product specifications
Frame
Applicable standards
Terminal cover
Improved wiring
Operation coil rating
Option units
10 A to 32 A
Certification to various standards including IEC, JIS, CE, UL, TÜV, CCC.
Standard terminal cover improves safety, simplifies ordering, and reduces inventory, etc.
Wiring and operability are improved with streamlining wiring terminal BC specifications.
Wide range of operation coil ratings reduces number of coil types from 14 (N Series) to 7 types and simplifies selection.
Diverse lineup includes Auxiliary Contact Block, Operation Coil Surge Absorber Unit, Mechanical Interlock Unit.
Magnetic Starter MS-T Series
◎
10A frame model is over 16% smaller with a width of just 36mm!!
◎New integrated terminal covers.
◎Reduce your coil inventory by up to 50%.
◎Be certified to the highest international levels while work is ongoing to gain other country.
Exceed your expectations.
Product Specifications
Degrees of freedom
Installation
Maximum load capacity
Maximum reach radius
Vertical:6 Horizontal:4
Vertical:Floor-mount, ceiling mount, wall mount (Range of motion for J1 is limited)
Horizontal:Floor-mount
Vertical:2-20ｋｇ Horizontal:3-20kg
Vertical:504-1503ｍｍ Horizontal:350-1,000mm
Robot MELFA F Series
◎
Compact body and slim arm design, allowing operating area to be expanded and load capacity increased.
◎The fastest in its class using high performance motors and unique driver control technology.
◎Improved flexibility for robot layout design considerations.
◎
Optimal motor control tuning set automatically based on operating position, posture, and load conditions.
High speed, high precision and high reliability industrial robot
Product Specifications
Number of poles
Voltage･Frequency
Exterior
Protection system
Electrically-driven
power system
Rotation direction
Compatible standard
2-poles, 4-poles, 6-poles
200/200/220/230V 50/60/60/60Hz EISA 230V 60Hz or 400/400/440/460V 50/60/60/60Hz EISA 460V 60Hz
Totally enclosed fan cooled type (inside, outside installation)
IP44
Motor with 2-poles over 11kW is dedicated for a direct connection.
Motors with 4-poles and 6-poles are for both direct and crossed belt connections.
Counter-clock-wise (CCW) direction viewed from the edge of axis.
JEC-2137-2000 (Efficiency is compatible with IEC 60034-30.)
Three-Phase Motor High Performance Energy-Saving Motor Super Line Premium Series SF-PR
◎
Compared to general-purpose motor SF-JR model, generated loss is reduced by 37% on average, and it is compatible with highly efficient premium IE3.
◎
Easy replacement is achieved as mounting dimension (frame number) is compatible with general-purpose motor SF-JR model.
◎
One motor can accommodate different power sources of Japan and the U.S. Three ratings in Japan meet the Top Runner standards, while it corresponds to EISA in the U.S.
◎
Can be driven by inverters as standard. Advanced magnetic-flux vector control by our FR-A800 achieves steady torque drive up to 0.5Hz.
High Efficiency & Compatible. New Launch of Super Line Premium Series SF-PR Model
Product specifications
Maximum number of control axes (NC axis + spindle + PLC axis)
Maximum number of part system
Maximum number of NC axes per part system
Maximum program capacity
Maximum number of files to store
Number of input/output points
Safety observation function
For detailed information, please refer to: http://www.mitsubishielectric.com/fa/worldwide/index.html
16 axes
Machining center system: 7 systems, Lathe system: 3 systems
8 axes
2,000 kB (5,120 m)
124 files/252 files
4,096 points
Safety signal comparison function, speed monitoring function, duplexed emergency stop
CNC Mitsubishi Numerical Control Unit C70 Series
◎A CNC structured in building block method on iQ Platform.
◎
High performance CNC integrated with high-speed PLC offers high-speed control to reduce cycle time.
◎A wide variety of FA products helps construct flexible lines.
iQ Platform compatible CNC to provide TCO reduction effect.
23
24