Projection Television Models WT-46809, WS-55809, WS-55819, WS-65809 and WS-65819 visit our website at w w w. m i t s u b i s h i - t v.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient magnitude to constitute a risk of electric shock.
Table of Contents IMPORTANT SAFEGUARDS ............................................................................4-5 Thank You Letter ...............................................................................................................................................8 Unpacking Your New TV...................................................................................................................................9 Special Features ...........................................................
IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3.
IMPORTANT SAFEGUARDS Continued 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13.
If you have questions regarding your television, call Consumer Relations at (800) 332-2119, or email us at MDEAservice@bigscreen.mea.com To order replacement or additional remote controls or owner’s guides call (800) 553-7278 or visit our website at w w w. M i t s u b i s h i -T V.
Thank You Thank You Letter ............................8 Unpacking Your New TV .................9 Special Features ..............................
Part I: Thank You A Note of Thanks from Mitsubishi... Thank You Letter Thank you for choosing Mitsubishi as your premier home entertainment partner. The development team at Mitsubishi understands that our customers are not average people: they demand and expect the very best. Hence, countless hours have been invested to produce a sophisticated product that we hope will meet all of your expectations.
Part I: Thank You Unpacking Your New TV Please take a moment to review the following list of items to ensure that you have received everything included: 1 Remote Control 2 (2) AAA Batteries 3 Active AV Network™ Cable 4 IR Emitter Cable 5 Product Registration Card Owner’s Guide Quick Reference Card VCR 2 3 5 6 7 8 9 0 QV Wide Screen Picture Format POWER You will be able to view pictures as the directors intended you to see them.
Installation Front Control Panel Functions .....12 Back Panel Functions ...................13 How Connections Affect: PIP and POP ............................... 14 Home Theater IR System .......... 14 Connecting to Your New Mitsubishi Bigscreen: Antenna or Wall Outlet Cable ...16 Cable Box ...................................16 VCR ............................................. 17 Audio Receiver...........................18 DVD Player..................................19 DTV Receiver ........................
Part II: Installation Front Control Panel Many remote control buttons are duplicated on the front control panel. These buttons are shaded in figure 1. Please see Remote Control Functions, pages 54-61, for an explanation of their usage. S-VIDEO TIMER POWER VOL ADJUST CH ENTER ADJUST ENTER MENU MENU A/V RESET VIDEO L-AUDIO-R INPUT CANCEL INPUT-4 Figure 1. Buttons can also be used for ADJUST, ENTER, MENU, and CANCEL, while in the menus.
Part II: Installation Back Panel 1 HIGH RESOLUTION INPUT 6 1 2 INPUT OUTPUT 2 MONITOR 3 COMPONENT 480i / 480p 1 (YPrPb) PIP VIDEO 3 LOOP OUT ACTIVE A/V NETWORK 4 1 7 Y G S-VIDEO ANT-A DTV (YPrPb/GRBHV) 480i / 480p / 1080i 2 (YPrPb) Pr R H Pb B V AUDIOLEFT/ (MONO) AUDIOLEFT/ (MONO) AUDIORIGHT AUDIORIGHT ANT-B IR - HOME THEATER 5 Inputs 1-3 2 Output (Monitor and PIP) The Monitor Output sends the TV audio and video signals, excluding component video or DTV video, to an A/
Part II: Installation How Connections Affect the PIP and POP How Connections Affect the PIP and POP 14 To see a picture in the PIP or POP inset, you may need to select an input source. If the only input connected is ANT-A, then both the main picture and the PIP/POP insert will be from that input source. If other video equipment is connected, you may be able to view these input sources as the PIP/POP insert.
Part II: Installation Special Setups: A/V Equipment (For Home Theater IR System) VCR: Do not connect the cables to the TV as directed on page 17. Connect the cables to the inputs labeled: •VCR 1, on the digital A/V receiver, models M-VR800 or M-VR1000. •VCR, on digital A/V receiver, models M-VR700 or M-VR900. DTV: Connect the cables as directed on pages 20-21, with one exception. Connect the digital audio output connection on the DTV receiver to a digital input on the back of the digital A/V receiver.
Part II: Installation Connecting an Antenna, Wall Outlet Cable, or Cable Box Separate UHF and VHF Antennas (Figure 1) 1 Connecting an Antenna, Wall Outlet Cable, or Cable Box 2 Connect the UHF and VHF antenna leads to the UHF/VHF combiner. Push the combiner onto ANT-A on the TV back panel. UHF/VHF combiners are not provided with the TV. They should be available at most electronic stores.
Part II: Installation Connecting a VCR TV back panel Antennas or Wall Outlet Cable HIGH RESOLUTION INPUT COMPONENT 480i / 480p 1 (YPrPb) INPUT 1 3 2 MONITOR ANT-A LOOP OUT ACTIVE A/V NETWORK (Figure 1) Pr R H Pb B VIDEO 1 480i / 480p / 1080i Y G PIP S-VIDEO Incoming Cable DTV (YPrPb/GRBHV) 2 (YPrPb) OUTPUT V AUDIOLEFT/ (MONO) AUDIOLEFT/ (MONO) AUDIORIGHT AUDIORIGHT 1 ANT-B IR - HOME THEATER 2 3 2 One from LOOP-OUT on the TV back panel to ANTENNA IN on the VCR back panel.
Part II: Installation Connecting an Audio Receiver Stereo Audio System TV back panel HIGH-DEFINITION INTERFACE (Figure 1) COMPONENT 1 (YPrPb) INPUT 1 2 DTV (YPrPb/RGBHV) 2 (YPrPb) Y/ G OUTPUT MONITOR 3 PIP Pr/ R S-VIDEO 1 Connecting an Audio Receiver 2 3 AUDIOLEFT/ (MONO) LOOP OUT ACTIVE A/V NETWORK AUDIOLEFT/ (MONO) AUDIORIGHT Red ANT-B IR - HOME THEATER 1 Audio system back panel section White CD IN AUX IN IN TAPE 1 OUT IN 1 3 Connect a video cable or S-Video cable from VIDEO
Part II: Installation Do not display the same stationary images on the screen for more that 15% of your total TV viewing in one week. Examples of stationary images are letterbox top/bottom bars from DVD or other video sources, side bars when showing standard TV pictures on widescreen TV’s, stock market reports, video game patterns, station logos, web sites, or stationary computer images. Such patterns can unevenly age the picture tubes causing permanent damage to the TV.
Part II: Installation Connecting a DTV Receiver DTV Connectors and Adaptors (Figure 1) Connecting a DTV Receiver The TV back panel has 5 RCA-type connectors, for the DTV connection. The back panel of your DTV receiver may use RCAtype connectors or BNC-type connectors. If your DTV receiver comes with BNC type connections, you will need to purchase BNC to RCA adaptors to connect the TV to the DTV receiver. These adaptors should be available at most electronic supply stores.
Part II: Installation Connecting a DTV Receiver DTV Receiver with RGB Video Connections (Figure 1) 1 See Appendix B, page 65, for RGB video signal compatibility information. For digital audio connections, see your DTV receiver and A/V receiver Owner’s Guides.
Part II: Installation Connecting the Active AV Network™ HIGH RESOLUTION INPUT COMPONENT 480i / 480p 1 (YPrPb) INPUT 1 2 3 MONITOR PIP Pr R ACTIVE A/V NETWORK H Pb B VIDEO LOOP OUT 480i /480p /1080i Y G S-VIDEO ANT-A DTV (YPrPb/GRBHV) 2 (YPrPb) OUTPUT V AUDIOLEFT/ (MONO) AUDIOLEFT/ (MONO) AUDIORIGHT AUDIORIGHT ANT-B IR - HOME THEATER Mitsubishi Component back panel section INPUT A/V NETWORK PREOUT REAR L R CENTER L IN OUT SUB WOOFER R 1 Figure 1.
Part II: Installation Warning: Do not leave stationary or letterbox images on-screen for extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. This projection TV uses picture tubes to project the image to the screen. All picture tubes age with use. As they age, their light output is gradually reduced. Normal TV pictures fill the screen with constantly changing images.
Setup Use of the Remote Control with Other A/V Products ................. 26-27 on-screen menu system.....28 Using ...............................28 Menu Screens (Overview)... 29-30 Setup Menu..............................31 Memorize Channels ..............31 Input Assingment..................31 A/V Connection.....................32 Language ...............................34 Clock Setting .........................35 Captions Menu ........................37 Channel Edit Menu..................
Part III: Setup Use of the Remote Control with Other A/V Products To Program the Remote to Control Other Brands of Audio and Video Products: (Figures 1-5) Use of the Remote Control with Other A/V Products 1 2 3 4 Move the slide switch at the top of the remote to the product you want to control. Press and hold the POWER button on the remote control. Enter the first three digit code listed for your equipment, and then release the POWER button on the remote control.
Part III: Setup Use of the Remote Control with Other A/V Products CABLE/DBS/DTV TV VCR 1 3 DVD AUDIO DVD/LDP Player Codes Code to enter: 003 016, 017 250 252 (016, 017) 254 253 To reset to default code, enter 000 2 If your DVD code is not listed here, please see page 66 for a complete listing. Figure 4. Programming the remote to control your DVD/ LDP.
Part III: Setup The Menu System SETUP Your TV has Mitsubishi’s exclusive on-screen operating system, which provides on-screen information for menu choices and changes (Figure 1). A picture (icon) will be highlighted when selected with the ADJUST arrows. The (icon) indicates that a submenu option can be displayed or an automatic function can be started. Press the ENTER button to display the options or start the function.
Part III: Setup Menu Screens (Overview) MAIN MENU SETUP menu MEMORIZE CHANNELS (Figure 1) :English Basic setup instructions and functions are available through the SETUP menu screens. You can put channels in memory, set the time and day, set your TV to be part of a home theater setup, view the menus in English or Spanish, and turn on or off input connections of the TV.
Part III: Setup Menu Screens (Overview) MAIN MENU V-CHIP LOCK Menu (Figure 1) Block or allow programing based upon rating signals sent by the broadcast station, or by time.
Part III: Setup SETUP Menu: MEMORIZE CHANNELS MAIN MENU Memorize Channels SETUP menu Memorize Channels :Ant-A Cable INPUT ASSIGNMENT AV CONNECTION (Home Theater) Language (Idioma) This selection memorizes the channels your TV can receive and skips the unused or weak channels. :English CLOCK DTV Note: If you have a DTV receiver connected, you will need to use that receiver’s channel memorization system to memorize digital channels. ADJUST to select item then move to and change option.
Part III: Setup SETUP Menu: A/V Connection (Home Theater) A/V CONNECTION Menu (Figure 1) The A/V CONNECTION menu allows you to customize the way your TV works with other A/V components, for a complete home theater experience.
Part III: Setup SETUP Menu: TV Speakers and A/V Receiver TV Speakers (Figure 1) MAIN MENU SETUP MENU AV CONNECTION menu (Home Theater) AV Network : Off TV Speakers (Internal) :On AV Receiver :Mits A Audio Output TV Volume Control :Variable This selection will turn on or off the TV’s internal speakers. You may select Off when sending the sound through a separate stereo system or surround sound A/V receiver.
Part III: Setup SETUP Menu: Audio Output, and Language Audio Output (Figure 1) Audio Output, and Language Select Fixed if your audio receiver or stereo system can be controlled with a remote. This allows you to adjust the volume with the system’s remote control or the TV remote control, if compatible. This setting is better for surround sound receivers. Select Variable if your audio receiver or stereo system cannot be controled with a remote. This allows the TV’s internal circuitry to adjust the volume.
Part III: Setup SETUP Menu: Clock Setting (Auto) MAIN MENU SETUP MENU Clock Setting (Auto) CLOCK menu (Figure 1) Clock Setting :Auto Time Zone :Eastern Daylight Savings Time :Applies Clock Time :N/A Set Day :N/A Setting the Clock Setting to Auto will automatically set the day and time using Extended Data Service (XDS) time data. This data is automatically retrieved from a PBS channel or other channel carrying this service.
Part III: Setup SETUP Menu: Clock Setting (Manual) Clock Time (Figure 1) For the manual clock setting, select the current time, including AM or PM. Press or to slowly adjust the time. Press and hold or to quickly adjust the time. MAIN MENU SETUP MENU CLOCK menu Clock Setting :Manual Time Zone :N/A Daylight Savings :N/A Clock Time : 12:00 AM Set Day :Sunday ADJUST to select item then move to and change option MENU to return Clock Settings (Manual) Figure 1.
Part III: Setup CAPTIONS Menu: Closed Captions MAIN MENU CAPTIONS Menu CAPTIONS menu (Figure 1) Closed Captions :On if mute CC Background :Gray ADJUST to select item then move to and change option MENU to return Figure 1. CAPTIONS Menu Broadcasters can send either Standard or Text closed captioning. Standard closed captioning follows the dialogue of the characters on-screen and displays in a small section of the screen.
Part III: Setup CAPTIONS Menu: CC Background CC Background (Figure 1) To make the closed captions easier to read, you can choose to display the background color as either black or translucent gray. MAIN MENU CAPTIONS menu Closed Captions :On if Mute CC Background :Gray ADJUST to select item then move to and change option CC Backround The content of captions is determined by the broadcaster. If your captions show strange characters, misspellings, or odd grammar, it is not a malfunction of the TV.
Part III: Setup CHANNEL EDIT Menu: Antenna and Channel Antenna MAIN MENU (Figure 1) CHANNEL EDIT menu Antenna :Ant-A Channel :002 Memory :Added Name :KCBS SQV :SQV1 Off Select Ant-A, or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and, for Ant-A and Ant-B, add channels to the SQV (Super Quick View™) list. ADJUST to select item then move to and change option ENTER for menu or to start MENU to return CANCEL Figure 1.
Part III: Setup CHANNEL EDIT Menu: Memory and Name MAIN MENU Memory CHANNEL EDIT menu (Figure 1) After all available channels have been memorized with Memorize Channels, page 31, weaker channels viewed with Ant-A or Ant-B can be added and unwanted channels can be deleted. Use the CHANNEL button on the remote control to view memorized channels.
Part III: Setup CHANNEL EDIT Menu: SQV (Super Quick View™) SQV (Super Quick View™) MAIN MENU Using The Remote Control CHANNEL EDIT menu Antenna :Ant-A Channel :002 Memory :Added Name :KCBS SQV :SQV1 Off Changing SQV banks using the remote control: 1 Press the SQV button. 2 To change memory banks, press a number button within 5 seconds of pressing the SQV button. Viewing and Adding SQV channels using the remote control: 1 Use the CHANNEL or number buttons Figure 1.
Part III: Setup V-CHIP Menu: V-CHIP LOCK V-CHIP LOCK (Figure 1) V-CHIP LOCK The V-CHIP LOCK allows you to Block or Allow programs based upon rating signals sent by the broadcasting station. The TV comes from the factory with the V-Chip lock in the Off setting. You can turn the lock On within the V-Chip Menu. The factory preset is TV-PG, allowing only programs rated TV-PG or lower. You can change the blocking level to various TV or movie ratings, lettered categories, and by time.
Part III: Setup V-CHIP Menu: V-CHIP LOCK V-Chip Signal Information Ant-A 011 KTTV 480i Standard Stereo SAP TV-PG DLSV (Figure 1) When provided by the broadcaster, V-Chip signal information can be displayed by pressing the INFO button on the remote control. Rating guidelines are provided by broadcast stations. TV programs and made-for-TV movies can be blocked by the TV Rating and/or Categories signal. Made-for-theater and direct-to-video movies can be blocked by the Movie Rating signal. Figure 1.
Part III: Setup V-CHIP Menu: V-CHIP HOURS/LOCK BY TIME MAIN MENU V-CHIP HOURS/LOCK BY TIME (Figure 1) V-CHIP HOURS/LOCK BY TIME will allow you to activate the V-Chip or lock the entire TV during specific hours. V-CHIP Start Time and V-CHIP Stop Time (Figure 2) V-CHIP HOURS/LOCK BY TIME Select the times you would like the V-Chip to be Active. By setting the V-Chip Start Time and V-Chip Stop Time to the same time, the V-Chip will be active 24 hours a day. Press or to slowly adjust the time.
Part III: Setup ADVANCED FEATURES Menu: TIMER, Timer Menu, and Set Time TIMER MAIN MENU (Figure 1) ADVANCED FEATURES menu The timer will automatically turn the TV on (if it is off) at the time you schedule and select. TIMER CONVERGENCE Video Mute :On Black Enhancement :On Video Display :480p Ant-A, Ant-B, DTV, INPUT-1, INPUT-2, INPUT-3, INPUT-4, COMPONENT-1, or COMPONENT-2. MENU to return Figure 1.
Part III: Setup ADVANCED FEATURES Menu: Set Day, Input, and Channel MAIN MENU ADVANCED FEATURES MENU Set Day (Figure 1) Select the days that the TV will turn on automatically. You can select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week. TIMER menu Timer : Off Set Time :12:00 PM Set Day :Everyday Input :Ant-A Channel :002 ADJUST to select item then move to and change option MENU to return Figure 1.
Part III: Setup ADVANCED FEATURES Menu: CONVERGENCE MAIN MENU CONVERGENCE ADVANCED FEATURES menu (Figure 1) TIMER CONVERGENCE Video Mute :On Black Enhancement :On Video Display :480p ADJUST to select item then move to and change option ENTER for menu or to start MENU to return Figure 1. CONVERGENCE MAIN MENU ADVANCED FEATURES MENU CONVERGENCE menu Your Mitsubishi TV has three picture tubes which are aligned to properly converge the projected light beams on the screen.
Part III: Setup ADVANCED FEATURES Menu: Advanced Convergence, Video Display, and Video Mute Advanced Convergence Advanced Convergence, Video Display, and Video Mute (Figure 1) 48 After adjusting the Red Convergence and Blue Convergence, you can fine-tune your TV by adjusting the Red and Blue convergence at 64 individual points. Move the flashing bracket to a position needing adjustment by pressing , , , or . Press ENTER to select the position (flashing will stop).
Part III: Setup AUDIO/VIDEO SETTINGS Menu AUDIO/VIDEO SETTINGS menu MAIN MENU (Figure 1) AUDIO/VIDEO SETTINGS menu AV Memory Reset Each of the 9 inputs has its own A/V memory. You can adjust each input’s A/V memory in two ways. You can use the menu, or the remote control. :Ant-A AUDIO SETTINGS VIDEO SETTINGS A/V Memory Reset A/V Memory Reset will return the currently selected input’s A/V memory to the factory settings.
Part III: Setup A/V Setting Descriptions: Audio Audio Settings Bass enhances or reduces low frequency sound. Treble enhances or reduces high frequency sound. Balance adjusts the level of sound between the left and right speakers. A/V Setting Descriptions: Audio Surround creates simulated stereo and surround effects. Your choices are: 50 • Off: No surround effects. Use this setting when using an A/V receiver with Dolby™ Pro Logic Surround, or Dolby™ Digital Surround.
Part III: Setup A/V Setting Descriptions: Video Video Settings IRIS™ is the Intelligent Room Illumination (light) Sensor. When IRIS™ is on, your TV will automatically adjust picture contrast and brightness for best quality (Contrast and Brightness cannot be adjusted manually). Brightness provides a slider to adjust the overall brightness of the picture. Sharpness provides a slider to adjust the detail and clarity. Color provides a slider to adjust the color intensity.
Operation Remote Control Functions...... 54-61 Overview.....................................54 Care and Operation ...................55 Channel Selection .......................56 Sleep Timer ................................56 Active A/V Network....................56 Home Theater IR System ..........57 Special Functions ......................58 Operation of PIP and POP... 58-59 Display Formats .........................60 IMPORTANT NOTES ......................
Part IV: Operation Remote Control Functions: Overview Overview (Following page, figure 1) 1 2 3 4 5 6 7 Overview 8 9 10 11 12 13 14 15 16 54 Slide Switch: Select A/V product to be controlled by the remote control. Numbers: Individually select channels or input information into TV. POWER: Turns power on and off for TV and other A/V products. SQV (Super Quick View™): Scan through a memorized list of favorite channels. QV (Quick View™): Switch to last channel viewed.
Part IV: Operation Remote Control Functions: Care and Operation Operation VCR CABLE/DBS TV 1 1 2 3 4 5 6 2 7 4 SQV INPUT 8 9 0 5 3 6 13 CANCEL 16 9 Remove the remote control’s back cover by gently pressing the ridged tab in the direction of the arrow and sliding off the cover. Load the batteries, making sure the polarities (+) and (-) are correct. HOME 14 15 For Best Results from the Remote Control: ADJUST MENU 17 INFO 18 Be within 20 feet of the equipment.
Part IV: Operation Remote Control Functions: Channel Selection and Sleep Timer Channel Selection Sleep Timer For Non-DTV Channels: Setting the Sleep Timer: or Channel Selection and Sleep Timer or Enter three numbers (for channel 2, press 002). Press the channel number and ENTER (for channel 2, press 2, then ENTER). Enter the channel number and wait four seconds. The TV will change automatically. Canceling the Sleep Timer: Press SLEEP to display the on-screen message box.
Part IV: Operation Remote Control Functions: Active A/V Network When the slide switch is set to VCR, pressing MENU on the TV remote control will: Turn the TV on and select input-1. Turn the VCR on and display the VCR menu. When using the Active AV Network™, always point the remote control towards the TV. If you are using the Active AV Network™ with the Home theater IR System, turn the TV and A/V receiver on before pressing PLAY on the TV remote control.
Part IV: Operation Special Functions and Operation of PIP and POP Remote Control Functions: Special Functions When your remote control has been Programmed to operate another manufacturer’s product, the function performed on each layer can vary.
Part IV: Operation Remote Control Functions: Operation of PIP and POP Changing PIP/POP Inputs 1 MAIN PICTURE Side-by-Side Press PIP INPUT to cycle through available inputs. To see which inputs can and cannot be used together, see How Connections Affect the PIP and POP - Table 1, page 14. Changing PIP/POP Channels Press PIP CH to scroll up and down through memorized channels on Ant-A, and Ant-B. POP 1 MAIN PICTURE 2 POP 2 Press ENTER/EXCH to exchange the main picture and the PIP/POP picture.
Part IV: Operation Remote Control Functions: Display Formats This is a wide screen TV (also known as a 16:9 TV). This shape reflects the new types of images available from HDTV and many DVDs. There are still many older style narrow screen images (called 4:3 aspect ratio) you will encounter. While there will never be a perfect solution for displaying a narrow image on a wide screen, Mitsubishi offers several display formats to choose from.
Part IV: Operation Non-Anamorphic Picture (4:3) Anamorphic Widescreen Picture (16:9) 2 2 3 3 4 4 5 5 1 1 Display Formats 61
Part IV: Operation Warning: Do not leave stationary or letterbox images on-screen for IMPORTANT NOTES extended periods of time. Mix the types of pictures shown. Uneven picture tube aging is NOT covered by your warranty. 62 The normal use of a TV should include a mixture of TV picture types. The most frequently used picture types should fill the screen with constantly moving images rather than stationary images or patterns.
Appendix A: Bypassing the V-Chip Lock Appendix A: Bypassing the V-Chip Lock Lock Bypass Instructions Have Been Filed for Future Reference Bypassing the V-Chip Lock After you set the lock, you need your passcode to view a V-Chip locked program, view the locked TV, cancel the lock, or enter the V-Chip lock menus. When entering the V-Chip Lock menu, this process deletes your old passcode and prompts you to enter a new passcode.
Appendix B: High Resolution Input Connection Compatiblity Component-1 and Component-2 Inputs DTV Input This input is compatible with most standard DTV receivers with component video outputs. Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Please check the DTV receiver specifications before connecting. Input Levels and Timing When Used With Component Video Signals EIA - 770.
Appendix C: Remote Control Programming Codes Appendix C: Remote Control Programming Codes A/V Receivers 66 Mitsubishi . .. .. . .. .. .. .. .. Admiral . .. .. .. Aiwa. .. .. .. .. Denon . .. .. .. Fisher . .. .. .. Gerrard . .. .. .. Harman Kardon . Jensen . .. .. .. JVC . .. .. .. .. Kenwood . .. .. Magnavox . .. .. Marantz . .. .. Mclintosh . .. .. Nakamichi . .. .. Onkyo . .. .. .. Optimus . .. .. Panasonic . .. .. Philips . .. .. .. Pioneer . .. .. .. Quasar . .. .. .. RCA . .. .. .. .. Sansui . ..
Appendix D: Cleaning and Service Cleaning Service Normally, light dusting with a dry, nonscratching duster will keep your TV clean. Use care when cleaning your TV with any other product. If you want to gently wipe down your TV with a lightly moistened soft cloth, first turn off and unplug your TV. You can add a few drops of mild liquid detergent to the water for oily dirt.
Appendix E: Troubleshooting Index 68 Problem Possible Solution • The TV remote control does not work. • Check that the batteries are installed correctly. • Check that the selected switch is set to “TV”. • Be no further than 20 feet from the TV when using the remote control. • The TV takes several seconds to respond to channel commands. • Press ENTER after a channel number to avoid delays. • Use the three digit number, i.e 002 for channel 2. • You cannot access a channel.
Index A Active A/V network 22, 56-57 adding and deleting channels 40 Advanced Features menu 30 adaptors (BNC to RCA), 20-21 adjusting (convergence), 47-48 alignment (convergence), 47-48 antennas (connecting), 13, 16-17 assistance, 6, 67 audio settings 50 B C cleaning, 4, 67 Clock (setting), 35-36 compatibility (signal), 65 contrast, 12, 48, 51 convergence, 47-48 D date (setting), 35-36 daylight savings time (DST), 35 dusting, 67 EXCH button on remote, 54-55,59 F formats (display), 60-61 front cont
Index S Index S-W safeguards, 4-5 servicing, 2, 5 signal types 1080i, 60, 65 480i, 48, 65 480p (progressive DVD), 14, 48, 65 720p, 65 960i, 48 Sleep Timer, 56 sound (adjusting), 50 Spanish, 29, 34 Special Functions, 58 SQV (Super Quick View™), 41 stand, 4 STATIONARY PICTURE WARNING, 23, 62 surface, 4, 67 surges, 5 T time (setting), 35-36 Timer (turn TV on), 45-46 Timer (Sleep), 56 treble, 50 Troubleshooting, 68 TV speakers, 33 U unpacking, 9 upgradeable, 9 70 V V-Chip Lock, 42 bypassing, 63 entry
Mitsubishi Projection TV Limited Warranty MITSUBISHI PROJECTION TELEVISION LIMITED WARRANTY MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants to the original purchaser of this television that if purchased from an authorized MITSUBISHI Audio/Video Dealer, should it prove defective by reason of improper workmanship and/or material: a. Parts. The lenticular (i.e. front picture) screen and/or the DiamondShield™ is warranted against defects in materials and workmanship for a period of 30 days.
If you have questions regarding your television, call Consumer Relations at (800) 332-2119, or email us at M D E A s e r v i c e @ b i g s c r e e n . m e a . c o m To order replacement or additional remote controls or owner’s guides call (800) 553-7278 or visit our website at w w w.m i t s u b i s h i - t v.c o m © 2000 Mitsubishi Digital Electronics America, Inc. 871D323A10 Designed and Printed in the U.S.A.
