Owners Manual

Features and controls

3-97

8. When all enrollment commands have been read out, the

voice guide will say “Speaker Enrollment is complete.”

The system will then end the speaker enrollment process

and return to the main menu.

OTE

● Completing the speaker enrollment process will turn on

the voice model automatically.

● The commands “Help” and “Cancel” will not work in this

mode.

Enabling and disabling the voice model and retraining

N00529100050

You can turn a voice model registered with the speaker

enrollment function on and off whenever you want.

You can also retrain the system.

Use the following procedure to perform these actions.

1. Press the SPEECH button.

2. Say “Voice training.”

3. If you have completed a speaker enrollment process once

already, the voice guide will say either “Enrollment is

enabled. Would you like to disable, or retrain?” or

“Enrollment is disabled. Would you like to enable, or

retrain?”

4. When enrollment is “enabled,” the voice model is on;

when enrollment is “disabled,” the voice model is off. Say

the command that fits your needs.

Say “Retrain” to start the speaker enrollment process and

recreate a new voice model. (Refer to “Speaker

enrollment” on page 3-96.)

OTE

● If you say “Retrain” you will proceed to Step 4 under

“Speaker enrollment.” The voice guide will say “This

operation should only be performed while the vehicle is

parked. Please say continue to perform this operation.”

BK0121200US.book 97 ページ２０１０年４月１４日　水曜日　午前１１時２４分