Owners Manual

6-18

For emergencies

9. Tighten the nuts in the order shown in the illustration until

each nut has been tightened to the torque listed here.

88 to 108 N•m (65 to 80 ft-lb)

10. Lower the jack all the way and remove it.

11. Check the tire inflation pressure. The recommended tire

pressure for your vehicle is listed on the tire and loading

information placard attached to the driver’s door sill as

shown in the illustration. Refer to “Tire inflation pres-

sures” on page 7-23.

CAUTION

● Never use your foot or a pipe extension to apply

added force to the wheel nut wrench when tighten-

ing the wheel nuts. If you do so, you can over-tighten

the wheel nuts and damage the wheel, wheel nuts

and hub bolts.

A- Vehicles sold in U.S.A. and Canada (Type 1)

B- Vehicles sold in Canada (Type 2)

BK0121200US.book 18 ページ２０１０年４月１４日　水曜日　午前１１時２４分