Owners Manual

Seat and restraint systems

2-31

OTE

● Before purchasing a child restraint system, try installing it

in the rear seat to make sure there is a good fit. Because of

the location of the seat belt buckles and the shape of the

seat cushion, it may be difficult to securely install some

manufacturer’s child restraint systems.

If the child restraint system can be pulled forward or to

either side easily on the seat cushion after the seat belt has

been tightened, choose another manufacturer’s child

restraint system.

Depending on the seating position in the vehicle and the

child restraint system that you have, the child restraint can

be attached using one of the following two methods:

• To the lower anchorage in the rear seat ONLY if the

child restraint is compatible with the LATCH system

(See page 2-31).

• To the seat belt (See page 2-34).

Installing a child restraint system using the

LATCH (Lower Anchors and Tethers for chil-

dren) system

N00418800072

Lower anchor locations

The outboard seating positions in rear seat of your vehicle are

equipped with lower anchors for attaching child restraint sys-

tems compatible with the LATCH system.

OTE

● The symbols on the seatback show the location of the

lower anchor points.

BK0121200US.book 31 ページ２０１０年４月１４日　水曜日　午前１１時２４分