Instruction manual

BEFORE OPERATION

For S size

paper

For L size

paper

Tray (cover)

Before printing,

1. Turn on the power of this unit.

2. Load print paper into the paper cassette.

3. Load the paper cassette with print paper into the unit.

4. Load a ribbon cartridge to the unit. (page 14)

5. Install the printer driver. (page 16)

PAPER/INK RIBBON SET

Make sure to use the following types of paper sheet and ink ribbon set.

2 PAPER/INK RIBBON SET

Model Size No. of prints Usage Remarks

CK30S S size 80 Color print 3 packs contained

CK30L L size 50 Color print 4 packs contained

LOADING PRINT PAPER

Adjust the paper cassette to the size of the paper to be loaded. Do not force paper that is too long

or too wide into the paper cassette.

NOTE

• Use the paper cassette designed for this unit only.

1 Remove the tray (cover) of the paper cassette.

2 Adjust the paper cassette to secure the paper.

Raise the plate in the cassette to use S-size paper.

Keep the plate laid flat to use L-size paper.

3 Take the print paper out of the packaging together with

the protection sheet.

NOTE

• The paper may be stuck together. Loosen it well before unpacking.

• The protection sheet is placed on the top of the print paper to protect

the printing surface. Hold the print paper together with the protection

sheet so that you do not touch the printing surface. Fingerprints or

dust on the paper’s surface may degrade the print quality.