Operation Manual

En-7

● OPERATING INSTRUCTIONS ●

ECONO COOL OPERATION

Press during COOL mode page 5 to start

ECONO COOL operation.

The unit performs swing operation vertically in various cycle according

to the temperature of the unit. Set temperature is set 4°F (2°C) higher

automatically.

Press again to cancel ECONO COOL operation.

• ECONO COOL operation also is cancelled when the VANE or POW-

ERFUL button is pressed.

What is “ECONO COOL”?

Swing air ﬂ ow (change of air ﬂ ow) makes you feel cooler than constant air ﬂ ow.

So, even though the set temperature is automatically set 4°F (2°C) higher, it is

possible to perform cooling operation with keeping comfort. As a result, energy

can be saved.

TIMER OPERATION (ON/OFF TIMER)

Press or during operation to set the timer.

(ON timer) : The unit will turn ON at the set

time.

(OFF timer) : The unit will turn OFF at the set

time.

* or blinks.

* Make sure that the current time is set correctly. Page 4

Press (Increase) and (Decrease) to set the

time of timer.

Each press increases or decreases the set time by 10 minutes.

• Set the timer while

or is blinking.

Press or again to cancel timer.

Note:

• ON and OFF timers can be set together. mark indicates the order of timer

operations.

• If power failure occurs while ON/OFF timer is set, see page 5 “Auto restart

function”.

Press

during COOL or HEAT mode page 5 to

start POWERFUL operation.

Fan speed : Exclusive speed for POWERFUL mode

Horizontal vane : Set position, or downward airflow position during

AUTO setting

• Temperature cannot be set during POWERFUL operation.

Press again to cancel POWERFUL operation.

• POWERFUL operation also is cancelled automatically in 15 minutes,

or when the ON/OFF, FAN, or ECONO COOL button is pressed.

POWERFUL OPERATION

JG79Y039H02_en.indd 7 11/18/2016 5:46:49 PM