User manual

Operation18
Shutdown
1. Press Power and a warn-
ing message appears. Press
Power a second time to
turn the projector off.
2. The Power indicator
light flashes orange and
the lamp shuts down, the
fans continue to run for
approximately 110 sec-
onds to cool down the pro-
jector.
To protect the lamp, the projec-
tor will not respond to any com-
mands during the cooling
process.
3. Disconnect the power cord from the wall socket.
Do not unplug the power cord before the projector shutdown sequence is complete or during
the 110-second cooling down process.
If the projector is not properly shut down, to protect the lamp, when you attempt to re-start
the projector within a few minutes, the fans will run for a few minutes to cool down. Press
Power again to start the projector after the fans stop.