User manual

Operation 29
4. Advance Menu
FUNCTION DESCRIPTION
Mirror
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. Contact your dealer for the ceiling mount bracket
(optional accessory) if you need to install the projector on your ceiling.
• Floor front: Select this setting
with the projector set on the floor
and audience viewing the projected
images from the front side of the
screen. This is the most common
setting.
• Ceiling front: Select this setting
with the projector suspended from
the ceiling and audience viewing the
projected images from the front side.
• Floor rear: Select this setting
when the projector is placed near the
floor and behind the screen. A
special rear projection screen is
required.
• Ceiling rear: Select this setting
when the projector is suspended
from the ceiling and placed behind
the screen. A special rear projection
screen is required.
Mute Time
Determines the length of time before the image and audio will automati-
cally resume when Mute is activated. When 0 is choosen, the image and
audio will not resume automatically.
Source Scan
Sets whether the projector searches automatically for input signals. If the
source scan is on, the projector will scan for input signals in the following
order: RGB/YPbPr --> Video --> S-Video until it acquires a signal. If the
function is not activated, the projector selects the last input signal.
Language
Language sets the language for the OSD control menus.
Use 3 Left/ Right 4on the projector or 3/ 4 on the remote control to
select your desired language from among English, French, German, Ital-
ian, Spanish, Simplified Chinese, Portugues and Japanese.
Splash Screen
Enables the user to select which screen will appear during projector start-
up. Three modes are available: Default, black screen or blue screen.