Manual

Part I1: Installation
WARNING:
Connecting a DVD Player
j DVD _ack Panel
Figure 1. Connecting the DVD playe_
Connecting an S-Video Device
DVD Player with Component Video
(Figure 1)
[] Connect the Component Video cables
from Y/Cr/Cb or Y/Pr/Pb VIDEO OUT
on the back of the DVD player to
COMPONENT on the TV back panel,
matching the correct components:
[] YtoY
[] CrorPrtoPr
[] CborPbtoPb
[] Connect a set of audio cables from
AUDIO OUT on the back of the DVD
player to COMPONENT AUDIO Input on
the TV back panel. The red cable []
connects to the R (right) channel, and
the white cable [] connects to the L
(left) channel.
TV b_k panda
Any S-Video Device
Figure 2. Connecting an S-Video Device.
S-Video Device
(Figure 2)
[] Connect an S-Video cable from
S-VIDEO OUT on the device back panel
to S-VIDEO INPUT-l, or INPUT-2 on the
TV back panel, or INPUT-3 on the TV
Front Control Panel.
[]
Connect a set of audio cables from
AUDIO OUT on the device back panel
to AUDIO INPUT-1 or INPUT-2 on the
TV back panel. The red cable connects
to the R (right) channel and the white
cable connects to the L (left) channel.
If your device is mono (non-stereo), con-
nect only the white (left) cable.