Installation Guide

Barn Door Hardware Kit
ASSEMBLY INSTRUCTIONS
BARN DOOR HARDWARE KIT
ASSEMBLY INSTRUCTIONS
Step 10. Hanging the Door
Place the assembled door onto the secured rail and tighten
each anti-jump block. Ensure all parts are operating correctly
by sliding the door side-to-side.
1
2
Step 11. Floor-Mounted Door Guide Installation
guide inside the morticed door, line up close to the opening.
placement then mark holes with a pencil and pre-drill 1/4"
the provided anchors.
1 3/16" (30 mm)
1/4" (8mm)
Step 12. OPTIONAL Wall-Mounted Door Guide Installation
Line up close to the opening, position and secure the
wall-mounted door guide directly into the wall or trim,
extending the guide as necessary to allow the door to
travel side-to-side. Tighten to secure in place.
1 3/16" (30 mm)
1/4" (8mm)
®
www.millikenmillwork.com
Note: Pre-routed door bottom
Step 10. Hanging the Door
Place the assembled door onto the secured rail and tighten each anti-jump
block. Ensure all parts are operating correctly by sliding the door side-to-side.
Image for bent strap shown
Step 11. Floor-Mounted Door Guide Installation
Once the door is plumb, position the oor-mounted door guide inside the
morticed door, line up close to the opening. Slide the door side-to-side to
ensure functionality for nal placement then mark holes with a pencil and
pre-drill 1/4" holes. If drilling directly into a concrete oor, use the provided
anchors.
BARN DOOR HARDWARE KIT
ASSEMBLY INSTRUCTIONS
Step 10. Hanging the Door
Place the assembled door onto the secured rail and tighten
each anti-jump block. Ensure all parts are operating correctly
by sliding the door side-to-side.
1
2
Step 11. Floor-Mounted Door Guide Installation
guide inside the morticed door, line up close to the opening.
placement then mark holes with a pencil and pre-drill 1/4"
the provided anchors.
1 3/16" (30 mm)
1/4" (8mm)
Step 12. OPTIONAL Wall-Mounted Door Guide Installation
Line up close to the opening, position and secure the
wall-mounted door guide directly into the wall or trim,
extending the guide as necessary to allow the door to
travel side-to-side. Tighten to secure in place.
1 3/16" (30 mm)
1/4" (8mm)
®
www.millikenmillwork.com
Note: Pre-routed door bottom
Step 12. OPTIONAL Wall-Mounted Door Guide Installation
Line up close to the opening, position and secure the wall-mounted door
guide directly into the wall or trim, extending the guide as necessary to allow
the door to travel side-to-side. Tighten to secure in place.
BARN DOOR HARDWARE KIT
ASSEMBLY INSTRUCTIONS
Step 10. Hanging the Door
Place the assembled door onto the secured rail and tighten
each anti-jump block. Ensure all parts are operating correctly
by sliding the door side-to-side.
1
2
Step 11. Floor-Mounted Door Guide Installation
guide inside the morticed door, line up close to the opening.
placement then mark holes with a pencil and pre-drill 1/4"
the provided anchors.
1 3/16" (30 mm)
1/4" (8mm)
Step 12. OPTIONAL Wall-Mounted Door Guide Installation
Line up close to the opening, position and secure the
wall-mounted door guide directly into the wall or trim,
extending the guide as necessary to allow the door to
travel side-to-side. Tighten to secure in place.
1 3/16" (30 mm)
1/4" (8mm)
®
www.millikenmillwork.com
Note: Pre-routed door bottom