User manual

EN
Operation FR40 AC/DC
10
6 Operation
6.1 Before initial use
I
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit.
Proceed as follows:
➤ Switch on the cooling device.
➤ Press the “SET” button twice.
➤ Use the “+” and “–” buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few
seconds. The display flashes several times before it returns to the current
temperature.
6.2 Energy saving tips
 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
 Defrost the cooling device once a layer of ice forms.
 Avoid unnecessarily low temperatures.
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter “Cleaning and mainte-
nance” on page 15).