Instructions

EN
Operation MCF 32, MCF 40, MCF 60 AC/DC
14
6.5 Using the cooling device
A
➤ Place the cooling device on a firm foundation.
I
➤ Connect the cooling device, see chapter “Connecting the cooling device”
on page 12.
A
➤ Press the “ON/OFF” button for between one and two seconds.
✓ The “POWER” LED lights up.
✓ The display switches on and shows the current cooling temperature.
I
✓ The cooling device starts cooling the interior.
I
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat
that generated during operation can dissipate. Ensure that the ven-
tilation slots are not covered. Make sure that the cooling device is
sufficiently far away from walls and other objects so that the air can
circulate.
NOTE
Place the cooling device as shown (fig. 1, page 3). If you operate
the cooling device in a different position it can be damaged.
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooling device
that are intended to be cooled at the selected temperature.
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED “POWER” flashes
orange.
FR34-FR40-FR60_MCF32-MCF40-MCF60_OPM_EMEA16.book Seite 14 Donnerstag, 13. Februar 2020 3:51 15