Instructions

EN
MCF 32, MCF 40, MCF 60 AC/DC
15
6.6 Latching the cooling device lid
➤ Lift the latch (fig. 1 1, page 3) and close the lid.
➤ Release the latch.
✓ The latch audibly clicks in place and secures the cooling device lid.
6.7 Setting the temperature
➤ Press the “SET” button once.
➤ Use the “+” and “–” buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The dis-
play flashes several times and then the current temperature is displayed
again.
6.8 Switching off the cooling device
➤ Empty the cooling device.
➤ Switch the cooling device off.
➤ Pull out the connection cable.
If you do not want to use the cooling device for a longer period of time:
➤ Leave the lid slightly open. This prevents odour build-up.
6.9 Using the interior light (only MCF60)
➤ Ensure the display shows the actual temperature.
➤ Press the “–” button to switch the interior light on.
➤ Press the “–” button again to switch the interior light off.
✓ The black dot (fig. 2 8, page 3) in the upper left corner of the display indi-
cates whether the interior light is switched on or off.
I
NOTE
The interior light switches off automatically after 30 minutes.
FR34-FR40-FR60_MCF32-MCF40-MCF60_OPM_EMEA16.book Seite 15 Donnerstag, 13. Februar 2020 3:51 15