- Linksys User Guide Wireless Network Access Point wap11

Instant Wireless™ Series
Appendix D: Specifications
Standards: IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
IEEE 802.11b (Wireless)
Channels: 11 Channels (US, Canada)
13 Channels (Europe)
14 Channels (Japan)
Ports: One 10/100 RJ-45 Port
Cabling Type: UTP Category 5 or better
Operating Range
(Wireless): Indoors: Up to 300 ft. (97 m)
Outdoors: Up to 1500 ft. (457 m)
Data Rate: Up to 11Mbps (Wireless), 10/100Mbps (Ethernet)
LEDs: Power, Act, Link (Wired - Link/Activity)
1.1 General
Emission Type: Direct Sequence Spread Spectrum (DSSS)
RF Frequency: 2471MHz - 2497MHz - Japan
2400MHz - 2483.5MHz - North America, Europe,
Korea and Extended Japan
2455MHz - 2475MHz - Spain
2446.5MHz - 2483.5MHz - France
Radio Chipset: RFMD
MAC Controller: TI ACX100 w/BBP
Power Output: 20 dBm
44
1.2 Transmitter
Frequency Stability: Within + 25 ppm
Data Modulation Type: BPSK (1/5.5Mbps) / QPSK (2/11 Mbps)
CCK (5.5/11 Mbps)
1.3 Power
Power Voltage: DC 5.0 Volt + 5%, AC Adapter AC 20V
Power Consumption: 5.0 Volt, 2.0A (Typical)
Dimensions: 7.31" x 6.16" x 1.88" (186mm x 154mm x 48mm)
Unit Weight: 20.5 oz. (0.58 kg)
Power: 5V, 550mA Tx, 230mA Rx
Certifications: FCC Class C, CE Mark
Operating Temp.: 0ºC to 55ºC (32ºF to 131ºF)
Storage Temp.: 0ºC to 70ºC (32ºF to 158ºF)
Operating Humidity: 0% to 70% Non-Condensing
Storage Humidity: 0% to 95% Non-Condensing
Environmental
45
Wireless Network Access Point