Multi-functional LED Lantern with RED Flashing LEDs Model No. 4059 INSTRUCTION MANUAL MobilePower, LLC. Miami, FL www.mobilepower-us.com Customer Support: (800) 708-8550 customerservice@mobilepower-us.
BEFORE YOU USE THIS DEVICE FOR THE FIRST TIME, PLEASE READ THE FOLLOWING NOTES IN THIS MANUAL AND HEED ALL WARNINGS AND CAUTIONS, EVEN IF YOU ARE FAMILIAR WITH HANDLING ELECTRONIC DEVICES. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. WARNING To prevent serious injury or damage: • Keep dry. DO NOT open, drop, short-circuit, incinerate, expose to temperatures higher than 140°F, or change/use if damage. • Only use charging adaptors provided with the lantern.
FEATURES • Impact-resistant ABS housing • Lithium Rechargeable battery • 3 - 0.5W LED built-in torch • 16 - 0.5W SMD LED as work light • 12 Red warning LED • Carrying handle for convenience • Foldable design with hanging hook Power requirements: 6V DC 400mA Battery Type: Internal Rechargeable Lithium-ion Battery Pack: 3.
OPERATION MODES This multifunctional LED worklight/flashlight/lantern features 4 different modes, you can select the suitable light operation mode for each application. 1. Work light Mode: Press the main power switch once and one side of the light will come on (8 SMD LED) 2. Lantern Mode: Press the main power switch twice and both sides of the light will come on (16 SMD LED) 3. RED emergency light: Press the main power switch three times and the 12 RED flashing LEDs will come ON 4.
The Multifunctional LED light features a foldable design with built-in hanging hook; to open the unit press the release switch (2), detach one side of the carry handle from the main body and open the unit to a 180° angle; to hang the unit, use the built-in hook on middle of the light. CHARGING INSTRUCTIONS THE MULTIFUNCTIONAL LED LIGHT MUST BE FULLY CHARGED BEFORE BEING USED FOR THE FIRST TIME. IT IS RECOMMENDED THAT THE BATTERY BE RECHARGED EVERY 3 MONTHS TO ENSURE MAXIMUM PERFORMANCE.
The AC CHARGING ADAPTER complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. USING THE DC VEHICLE CHARGING ADAPTER 1. Plug the DC Vehicle charger jack into the charging port on the bottom of the light next to the charging indicator LED. 2.
CLEANING All exterior surfaces of the multifunctional LED light can be wiped clean with a soft cloth dampened with a mild soap and water solution. Do not immerse or submerge any parts of the light in water or any other solvent. Never use solvents or cleaning agents containing petroleum (petrol, kerosene, oil), paint thinner, turpentine, alcohol or ammonia. Harsh materials like these can damage the surfaces. MAINTENANCE Only qualify service personnel must perform repairs.
are shipping the defective products to us. MobilePower, LLC will not be responsible for lost packages sent by consumers. MobilePower, LLC. Will not be responsible for damages incurred during shipment to our facilities. Failure to provide the original purchase receipt or proof of purchase will render this warranty invalid.
