Instruction Manual

 45/53

4.9.3 Update
The new released software could be upgraded from the Local PC side or
remotely. Click the “Browse” to locate the new software image file in the PC.
Then, click “Update Software” to process the software update. NOTE: The
upgrade process takes about 10 minutes to complete, and your IG7200 will
reboot.

Figure 42 System management-Upgrade



4.9.4 Backup/Restore
Click “Save”, you may save your IG7200’s configurations to a file on your PC.
The backup file is a compress file (.tar). It includes System Configuration file.
Click “Browse” to locate the setting file saved on the Local PC. The file can
be a System Configuration file (config.xml). Then, click “Update” would apply
the settings to the IG7200 according to the configuration file.