User guide

IG7600 Administration Manual
G.168 Echo Cancellation
Voice Codec: G.711u, G.711a, G726-16, G726-24, G726-32 and G.726-40 (G.729a
optional)
Support FAX/modem tone detection and auto-fallback to G.711
T.38
Digital Audio
Codec: G.711 a-law/μ-law 64Kbps, G.729
SIP Call Offer /Answer: Codec auto capacity exchange
Echo Cancellation: G.168 for each voice line
Silence Detection/Suppression
Comfort Noise Generation
Adaptive jitter buffer
Different frame size support (10,20,30,40, 50, and 60ms)
Packet loss concealment
Out-band (RFC2833) (In-band DTMF is not supported by AA now)
Security
Password protected system management
User authentication for PPP (PAP/CHAP/MSCHAP)
Firewall
Packet Filtering
Access Control List
Wireless Security:
Support WEP (64, 128-bit) encryption
802.1x and WPA/WAP2 authentication
MAC Address-based access control
WDS support
Configuration Management
LAN/WAN management via Telnet interface or Web-based browser interface
Status display and event report from Web-based management
Configuration Save and Restore from PC
Reset to factory default
System Clock Setting
Manual / Automatic by Network NTP Server
Remote Diagnostics
Software Upgrade
TR-069
Remote Diagnostic
System for Debugging and Event log
Device Diagnostic, Enable remote test following:
Test the connection to your local network,
The connection to your Internet service provider,
The status of PSTN Line,
The status of IP Trunk Line,
The status of VAA Line,
The status of FXS
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 122 of 127