User guide

IG7600 Administration Manual
Appendix 2: Feature Access Codes
The Feature Access Codes are applied in IP2061/M62/M22 Phones, M54 Smart Phones
and FXS phone only. It’s to activate/cancel some IG7600 user-specified functions.
These Feature Access Codes are used when the phone is at idle state.
Direct Call Forward
Forward all of the calls without regard to the extension status.
(Type: 0 – ICM, 1 – Outside, 2 – Both)
To Activate
*21 + Type + Ext/VAA/UCD No.
*21 + Type + * + (PSWD) + * + Outside Number
To Cancel
**21
Busy Call Forward
Forward the calls if the extension is busy.
(Type: 0 – ICM, 1 – Outside, 2 – Both)
To Activate
*22 + Type + Ext/VAA/UCD No.
*22 + Type + * + (PSWD) + * + Outside Number
To Cancel
**22
No Answer Call Forward
Forward the calls if the extension doesn't answer the call within No Answer Time.
(Type: 0 – ICM, 1 – Outside, 2 – Both)
To Activate
*23 + Type + Ext/VAA/UCD No + * + Time.
*23 + Type + * + (PSWD) + * + Outside Number + * + Time.
To Cancel
**23
DND Call Forward
Forward the calls if the extension enables DND.
(Type: 0 – ICM, 1 – Outside, 2 – Both)
To Activate
*24 + Type + Ext/VAA/UCD No
*24 + Type + * + (PSWD) + * + Outside Number
To Cancel
**24
Follow Me Call Forward:
Forwards calls at your extension to the extension where you are currently working.
(Type: 0 – ICM, 1 – Outside, 2 – Both)
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 124 of 127