User guide

IG7600 Administration Manual

4.17 Do Not Disturb (DND)

Extension users can enable DND to reject all incoming calls. The DND on an extension

can be allowed or denied through the feature access code.

To enable the Do Not Disturb feature, dial *4.

To disable the Do Not Disturb feature, dial **4.

DND and FWD can be set independently. If multiple features are set at the same time, it is

applied in the order of Direct FWD > DND > Busy/No Answer FWD.

4.18 DSS/EDM

IG7600 supports to provide the status of the extensions and trunk lines. The status can be

shown on the LED of IP2061/M22/M62’s flexible keys. For IP2061, M22 and M62, they

support EDM modules that can have 24 more keys.

PS: basically the button lamp will light when the button’s corresponding

destination is busy, but when the destination is an M54(-i), the lamp will not lit

under the same circumstance.

4.19 Feature Button Reset

The feature is used to reset all feature buttons to be the same as the current settings in

IG7600.

To reset the Feature Buttons, dial *68 + (Password)

4.20 Feature Key Programming

Feature Keys can be programmed by phone users. A feature key can be programmed for

line appearance.

To program a Feature Key, dial *70 + (Feature Key number: 01 – 04/44

(*)

) + (Feature

Key Type; 00 - 08) + Number

Feature Key Type:

00: Null; Number should be null.

01: Extension; Number can be an Extension or Virtual number.

02: Trunk; Number can be a PSTN, IP Trunk or Trunk Group number.

03: Call-Park; Number can be a Park number.

04: Feature Key; Number can be a feature access code

05: Others; Number could be an outside phone number.

06. Do Not Disturb; Number should be null.

07: Live Record

08: Virtual Mailbox key; Number can be a Virtual number.

Note: IP2061, M22 and M62 supports EDM module, it provides 24 more keys for feature

access.

4.21 Feature Reset

When the feature is activated, the extension will return the features that can be

programmed through feature codes to default settings. It will affect the following options:

Call Waiting disabled

Call Waiting Tone Enabled