User guide

IG7600 Administration Manual

The Dynamic Host Configuration Protocol (DHCP) is an Internet protocol for automating

the configuration of computers that use TCP/IP. DHCP can be used to automatically

assign IP addresses, to deliver TCP/IP stack configuration parameters such as the

subnet mask and default router, and to provide other configuration information.

This page shows the setting of WAN interface which is DHCP mode (Figure 6-9).

Figure 6-9. Advanced – WAN (DHCP Mode)

The Point-to-Point Protocol over Ethernet (PPPoE) requires a user name and password

that your ISP has provided to you to establish your connection. This page shows the

setting of WAN interface which is PPPoE mode (Figure 6-10).

Figure 6-10. Advanced – WAN (PPPoE Mode)