User guide

IG7600 Administration Manual

6.4.2 Secondary WAN

IG7600 supports secondary WAN which is dedicated for IP Trunk. If you check “Enable

Secondary WAN” then it will turn LAN port into secondary WAN port. And you still can use

wireless interface for LAN access. Regarding secondary WAN settings, please refer to

6.4.1 WAN settings.

6.4.3 LAN

It allows you to set LAN IP and Subnet Mask for LAN interface. A DSP IP address can be

configured for FXO/FXS application. You can also enable or disable DHCP Server and

configure related settings. End IP Camera Address cannot be configured; it is generated

automatically when you configure the Start IP Camera Address. The “Static IP Lease List”

allows to program 32 entries to have the fixed IP address for the specified devices. If

needed, it can also configure the second IP address and Subnet Mask for the LAN

interface (Figure 6-11).

Info: If the DHCP Pool is changed, and the new “Start IP Address” is bigger than

the older one or the new “End IP Address” is smaller than the older one, the Static

IP Lease List will be cleared automatically.