User guide

IG7600 Administration Manual

Start Paging Group number: 3 paging groups are defined in IG7600. If dialing a

Paging Group number, the call will page to predefined internal IP phones. It can also

select the Range like All Paging Number. The maximum phones for each paging group

are 49.

While pressing “Configuration” in “Start Paging Group number”, it shows Paging

Group Configuration screen. (Figure 6-62)

Figure 6-62. Voice – System – Numbering Plan – Paging Group

Start UCD Group number: 4 UCD groups are defined in IG7600. The maximum

phones for each UCD group are 50. If one UCD Group is assigned to Answering

Position of certain line, when there is an incoming trunk call, extensions of the UCD

group will be called and ringing

While pressing “Configuration” in “Start UCD Group number”, it shows UCD Group

Configuration screen. (Figure 6-63)

Figure 6-63. Voice – System – Numbering Plan – UCD Group

There are seven items to be decided.

For Ring Mode, IG7600 supports “All Ring”, “Linear” and “Distributed” mode. The “All

Ring” mode is no needed to use “No Answer Time” and “Timer Enable”.