User guide

Page 37

MOCET IP3092/IP3092L Communicator User Guide

3.7.2. Call Features

You may put your IP phone in DND mode, Auto Answer mode, or Call Waiting mode by

below steps:



Select “Settings” command from the main menu.



Select “Phone Settings” from the sub-command area



Select “Call Features” from the sub-command area



You may enable/disable the DND, Auto Answer, and Call Waiting modes from

below screen display:

3.7.3. Hotline Setting

The Communication provides 3 hotline numbers, when the user press the “Hotline” hot-

key of Communication, the Communicator will auto dial out the first hotline number. If

nobody answers the call until timeout (you can configure the timeout setting from

Communicator’s web interface, please refer to the Communicator User Guide for the

configuration of Communicator web interface), then the Communicator will terminate the

first call, and dial the second hotline number out. The round robin will be continued

among these 3 hotline numbers until a call is answered, or the hotline call is cancelled.