User guide

Page 59
MOCET IP3092/IP3092L Communicator User Guide
7. Phone Firmware Upgrade
The Communicator supports several different ways to update its firmware (please refer to
the table below). This is for system administrators or service providers. End users normally
do not have to upgrade firmware by themselves. Please contact your Administrator or
service provider for assistance.
Method Description User Admin Factory
Web browser Upload firmware using a web
browser and file saved on a PC
● ●
SD card Upload firmware from SD card on
boot (this is an emergency procedure
for users)
● ● ●
Auto-provisioning Upload firmware from remote server
using TFTP, FTP, HTTP or HTTPS
● ●
Key sequence Upload firmware from local server
using TFTP, SD card, or USB drive
●
Note: Please contact your adminstrator or service provider if you have any issues or think
you need to update your Communicator.